C Series
Golden Crown C series tractor, with exquisite appearance, adopts the shuttle gear structure with 8 forward gears and 8 reverse gears, with good power performance, large operating space and comfortable driving. It is ahead of similar domestic models and is widely used in plowing, rotary Farming, transportation and other operational needs.
High Operating Efficiency
Fast Operation
Specially designed high-speed transport gears, advanced side-drive shifting system, maximum speed up to 39km/h, high transport efficiency, low fuel consumption, adopting nine forward gears and three reverse gear shifting mechanisms, which fully meet the needs of farming, and are more efficient than domestic similar gears. Tractors are easier to maneuver.
High Operating Efficiency
New Type Of Diesel Filter
New type of diesel filter,excellent filtering effeciencyeasy to repair and maintain.
High Operating Efficiency
Powerful
Adopting Changfa three cylinder diesel engine with imported fuel injection system,lower fuel consumption,more fuelefficient,fast acceleration,more powerful,domestically leading in the similar tractors.
| Tractor Model | CFC350 | CFC354 |
| Engine Model | CF4B35T | |
| Engine Type | In-line, water-cooled, four-stroke, direct injection | |
| Engine Rated Power kW | 25.8 | |
| Calibration Speed r/min | 2400 | |
| Dimensions (L×W×H)mm | 3504×1485×2237 | |
| Wheelbase mm | 1808 | 1798 |
| Wheel tread mm Front wheel | 1250～1550（Commonly used1250） | 1210 |
| Wheel tread mm Rear wheel | Step-adjustable: 1100～1400 (commonly used 1200), optional step-less adjustable: 1100～1640 (commonly used 1200) | |
| The minimum ground clearance mm | 332 | 310 |
| Specified traction kN | 7.5 | 9.2 |
| Tire Specifications Front wheel | 5.00-15 | 6.00-16 |
| Tire Specifications Rear wheel | 11.2-24 | |
| Minimum Using Mass Kg | 1590 | 1730 |
| Clutch | Dry, single piece, normally engaged, double acting | |
| Gearbox | 8 forward gears + 8 reverse gears, meshing sleeve shifting Transport gears: 16 forward gears + 16 reverse gears, meshing sleeve shifting |
|
| Brake Type | Oil bath, double disc, mechanical operation | |
| Driving Speed km/h | Forward 2.21～26.42 (optional transport gear up to 39.11 km/h), backward 2.06～24.69 | |
| Maximum lifting force at 610mm after the lower suspension point kN | 6.5 | |
| Pto Shaft Speed r/min | 540/760, optional 540/1000 or 760/1000 | |
| Tractor Model | CFC400 | CFC404 |
| Engine Model | CF4B40T | |
| Engine Type | In-line, water-cooled, four-stroke, direct injection | |
| Engine Rated Power kW | 29.5 | |
| Calibration Speed r/min | 2400 | |
| Dimensions (L×W×H)mm | 3504×1515×2262 | |
| Wheelbase mm | 1808 | 1798 |
| Wheel tread mm Front wheel | 1250～1550（Commonly used1250） | 1210 |
| Wheel tread mm Rear wheel | Step-adjustable: 1200～1400 (commonly used 1200), Optional stepless adjustment: 1200 ~ 1640 (commonly used 1200) |
|
| The minimum ground clearance mm | 360 | 320 |
| Specified traction kN | 8.0 | 9.5 |
| Tire Specifications Front wheel | 5.00-15 | 6.5-16 |
| Tire Specifications Rear wheel | 12.4-24 | |
| Minimum Using Mass Kg | 1600 | 1740 |
| Clutch | Dry, single piece, normally engaged, double acting | |
| Gearbox | 8 forward gears + 8 reverse gears, meshing sleeve shifting Transport gears: 16 forward gears + 16 reverse gears, meshing sleeve shifting |
|
| Brake Type | Oil bath, double disc, mechanical operation | |
| Driving Speed km/h | Forward 2.32～27.73 (optional transport gear up to 39.11 km/h), backward 2.16～25.92 | |
| Maximum lifting force at 610mm after the lower suspension point kN | 6.5 | |
| Pto Shaft Speed r/min | 540/760, optional 540/1000 or 760/1000 | |
| Tractor Model | CFC450 | CFC454 |
| Engine Model | CF4B45T-Z | |
| Engine Type | In-line, water-cooled, four-stroke, direct injection | |
| Engine Rated Power kW | 33.1 | |
| Calibration Speed r/min | 2400 | |
| Dimensions (L×W×H)mm | 3504×1495×2280 | 3504×1526×2280 |
| Wheelbase mm | 1808 | 1798 |
| Wheel tread mm Front wheel | 1250～1550（Commonly used1250） | 1270 |
| Wheel tread mm Rear wheel | Step-adjustable: 1210～1426 (commonly used 1210), Optional stepless adjustable: 1210 ~ 1660 (commonly used 1210) |
|
| The minimum ground clearance mm | 390 | 356 |
| Specified traction kN | 9.0 | 10.5 |
| Tire Specifications Front wheel | 5.50-16 | 7.50-16 |
| Tire Specifications Rear wheel | 11.2-28 | |
| Minimum Using Mass Kg | 1680 | 1820 |
| Clutch | Dry, single piece, normally engaged, double acting | |
| Gearbox | 8 forward gears + 8 reverse gears, meshing sleeve shifting Transport gears: 16 forward gears + 16 reverse gears, meshing sleeve shifting |
|
| Brake Type | Oil bath, double disc, mechanical operation | |
| Driving Speed km/h | Forward 2.41 ~ 28.81 (optional transport gear up to 39.11 km/h), Backward 2.25～27.04 |
|
| Maximum lifting force at 610mm after the lower suspension point kN | 8.5 | |
| Pto Shaft Speed r/min | 540/760, optional 540/1000 or 760/1000 | |
| Tractor Model | CFC500 | CFC504 |
| Engine Model | CF4B50T-Z | |
| Engine Type | In-line, water-cooled, four-stroke, direct injection | |
| Engine Rated Power kW | 36.8 | |
| Calibration Speed r/min | 2400 | |
| Dimensions (L×W×H)mm | 3504×1495×2280 | 3504×1526×2280 |
| Wheelbase mm | 1808 | 1798 |
| Wheel tread mm Front wheel | 1250～1550（Commonly used1250） | 1270 |
| Wheel tread mm Rear wheel | Step-adjustable: 1210～1426 (commonly used 1210), Optional stepless adjustable: 1210 ~ 1660 (commonly used 1210) |
|
| The minimum ground clearance mm | 390 | 356 |
| Specified traction kN | 9.0 | 10.5 |
| Tire Specifications Front wheel | 5.50-16 | 7.50-16 |
| Tire Specifications Rear wheel | 11.2-28 | |
| Minimum Using Mass Kg | 1680 | 1820 |
| Clutch | Dry, single piece, normally engaged, double acting | |
| Gearbox | 8 forward gears + 8 reverse gears, meshing sleeve shifting Transport gears: 16 forward gears + 16 reverse gears, meshing sleeve shifting |
|
| Brake Type | Oil bath, double disc, mechanical operation | |
| Driving Speed km/h | Forward 2.41 ~ 28.81 (optional transport gear up to 39.11 km/h), Backward 2.25～27.04 |
|
| Maximum lifting force at 610mm after the lower suspension point kN | 8.5 | |
| Pto Shaft Speed r/min | 540/760, optional 540/1000 or 760/1000 | |
Contact us immediately if necessary
