The straight line operation speed is fast, and the stable operation speed of harvesting corn can reach 8-9km/h.

Equipped with Yuchai six-cylinder 210 horsepower engine, it has strong power and can meet the needs of long-term high-load operation.

Standard static hydraulic drive, using 105cc large displacement famous hydraulic pump and motor, strong working capacity, one-lever steering is more flexible, and the operator's work intensity is low.

The transfer speed can reach 32km/h, saving non-working time and increasing actual working time.

Open granary, with a volume of up to 7.5m³, reduces grain unloading times, extends effective operating time, and improves operating efficiency.

The total capacity of the main and auxiliary fuel tanks is 560L, which reduces the number of refueling times and effectively improves the overall efficiency.

Standard static hydraulic drive, using 105cc large displacement famous hydraulic pump and motor, strong working capacity, one-lever steering is more flexible, and the operator's work intensity is low.

Adopt hydraulic horizontal unloading, the unloading height can reach 4.3m, which is more convenient and efficient when the unloading truck follows the vehicle.

The patented corn cutting table has less corn cob dropping, excellent harvesting and lodging performance, and smooth feeding without accumulation. (Patent No.: 201720372394.2)

The header lifting cylinder is equipped with an accumulator, which makes lifting and lowering smoother and provides a good driving experience.

The cross-flow fan is used, the wind field is evenly distributed, the air inlet duct is enlarged, the cleaning air volume is larger, the grain loss is small, and 1.5 catties more is harvested per mu.

Using single longitudinal axial flow threshing and separation mechanism, threshing is gentle, separation is thorough, harvested corn has a low breakage rate, and each kilogram of grain can be sold for 0.5 cents more.

The enhanced 1000 series gearbox has an overall strength increase of more than 30%, the strength of key gears increased by 50%, and the strength of key bearings doubled; the oil seal adopts a special structural design and does not leak oil.

Standard configuration: Changfa original four-wheel drive, strong ability to pass complex road conditions, bridge body strength and key gear strength increased by more than 50%, higher reliability.

The fan adjustment separation bearing adopts high-quality human-oriented bearings, with larger bearings and optimized fork technology, which has improved strength and longer service life.

The material of the wind screen intermediate shaft is upgraded, oil channel lubrication is added, the process is optimized, and the transmission is more reliable.

The main drive chain of the header uses double-row 12A chain, which has higher reliability.

The connection between the double pump and the belt pulley is optimized, and the pump seat and spline connection are adopted, which has a reasonable structure and is stable and reliable.

The gap between the elevator scraper and the shell is optimized, and the bottom of the elevator is changed to an assembled structure for easy inspection and maintenance.

The enhanced 1000 series gearbox has an overall strength increase of more than 30%, the strength of key gears increased by 50%, and the strength of key bearings doubled; the oil seal adopts a special structural design and does not leak oil.

Standard configuration: Changfa original four-wheel drive, strong ability to pass complex road conditions, bridge body strength and key gear strength increased by more than 50%, higher reliability.

The fan adjustment separation bearing adopts high-quality human-oriented bearings, with larger bearings and optimized fork technology, which has improved strength and longer service life.

The material of the wind screen intermediate shaft is upgraded, oil channel lubrication is added, the process is optimized, and the transmission is more reliable.